Description :

T6000 adopt the advanced technology, is used for kinds of Bug, car track, Wireless pinhole camera, phone undercover software, instrument for Casino scam and so on. The function can meet  Military/police surveillance. It can detect Electrical source, so will prevent you and your family from the  damage of Electromagnetic radiation. It adopts digital receiving mode, the difference from other detectors, one is widen the detection frequency domain, avoid the disturbance from clutter signal of life. second is improved the sensitivity, the advantage is that no matter how strong signal transmitting, can easily locate it by adjusting knob. So it is the most advanced portable wireless signal detection equipment. The normal wireless detector can not detect CDMA signal, if you dial it via China Telecom, the normal detector never alarm, because CDMA phone agreement was invented by the U.S. Military, it is a radio frequency hopping technology, was called code division multiple access, it is hard to detect, the reason is the small of transmitted power. So T6000 is the can accurately identify the CDMA communication protocol of monitoring equipment.

Features :

Professional radio detection device, high sensitivity, adjustable threshold, large distance of frequency detection.

Easy to use(only switch+sensitivity knob),Sound and light alarm indicator, accurate and reliable.

Detect phone, unicom, telecom, 2G.3G.4G Card for bugs and locator.

Detect Hith-speed upload GPS locator packet locator.

Detect 1.2G/2.4G wireless camera.

Detect hidden 5.8GHZ wireless camera and Wireless eavesdropping.

Specification :

Frequency: 1MHz-8000MHz

Detecting the dynamic: >73Db

Detection sensitivity: ≤0.03mw (main frequency)

Detect distance:

2.4GHz wireless camera: 10m2 (standard 10mW camera)

1.2GHz wireless camera: 15m2 (standard 10mW camera)

Network: 2G,3G,4G:10m2

Indicating: 9 level LED Luminous instructions/modulation sound instructions

Power: built-in 3.7V lithium polymer battery

Working current: 60mA working time: 10-15 hours

Material: aluminum alloy   weight: 120g

Operation method:  

Hibernation GPS detection: Turn on the hibernation detection power switch. The sleep power-on indicator lights up and enters the working state. If GPS is detected, it will sound an alarm.

Turn on wireless probe knob power switch, second led light, means power to work normally.

Turn the knob clockwise to the largest, enter standby mode. If receiving stronger environmental signal, then adjust the rotary knob back,the light flash not more than the fifth light.

Signal is full, soundbeep.The signal is more strong, the sound will be more rapid.

When light bars are full and bright, the sound is more rapid, means it is near to the target. If we adjust the rotary knob back when the signal is strong, so it is easy to find the target object.

Due to high sensitivity, so we can receive the signal from phone base stations, television broadcasting station on the Road. If you want to find car GPS, pls drive it to the place with weak signal, also pls set the equipment of communication as airplane mode, then the detector can work.

If there is no target in room, but the detector will alarm at times, the possible will be:

1) Your own communication equipment will match code with base stationin timing and automatic.

2) the target is near to room, maybe in another room, or somebody called in another room.

3) Too close with the wireless router.

Package includeds :

1 x T6000 RF Detector

1 x User Manual